Text Box:  

Ed Livingston Sales Co., LLC

oilfield equipment

File Number Make Model Year Equipped Carrier Click on Image to Enlarge
1259-1 Air Booster Joy WB-12 1979 Joy model WB-12 booster w/6" x 5" pistons. Tested to 1377 psi--Powered by 12V71TT Detroit diesel engine w/air start system and air throttle.
DIMENSIONS:
7.1 mtr L x 2.6 mtr W x 10 mtr H = 57 cu mtr.
23.3' L x 8.5' W x 10' H =2013 cu ft.
Wt = 15,500 Kgs = 34,170 lbs
Master skidded in a lifting frame which has a four leg sling set giving a single lift point.
1239-6 Air Compressor IR 1150/400 1980 EXCELLENT PRICE ON 1150 AIR WITH ONLY 2335 TOTAL HOURS
IR model XHP-1150/400 p/b 12V71 Detroit diesel. Complete with cooler and receiver tank. Skid mounted. 2335 total hours.
AVALIABLE AT EXTRA COST:
Tandem axle 25 ton goosenneck lowboy trailer. Add: $4000.
Skid Mtd.
1125-7 Challenger 320 1980 REDUCED PRICE ON THIS COMPLETE READY TO DRILL PACKAGE!
1980 Challenger 320 complete with 64/150 one piece mast w/stabbing board--60 Series Detroit diesel (430 hp) and LBT-5860 Allison automatic transmission--Stacked double drum drawworks w/air clutches--Paramac 12" Hydromatic brake--(6) part 7/8" lines both drums--(2) Mckissick 75 ton traveling blocks--Oilwell 17 1/2" rotary table--Howard-Turner 100 ton swivel--4 1/4 x 37' hex kelly--Varco roller type drive bushing--Make up and break out catheads--Hydraulic leveling jacks--
ACCESSORY EQUIPMENT INCLUDED WITH RIG.
MUD PUMP: Wilson 600 7 1/2 x 14" duplex mud pump--Gear end SN:600389A with high pressure forged steel fluid end and screw caps--Fluid end SN: 45273--Fitted w/6" liners and pistons--p/b electronic 60 series Detroit diesel--Model: 6067PK60 (500 HP)-- on oilfiled skid w/ roof, mud guage, shear relief valve-- and air contr--Weight approx. 70,000 lbs--11' 8" W x 27' 2" L x 10' 2" H..
TUBULARS: Approx. 3600' used 4" x Range II bottleneck x 3 1/2 XH tool joints
(10) 5 1/2" x 30' smooth w/ 4" H-90 tool joints drill collars.
GENERATOR: 200 KW Generator p/b NT855 Cummins
SUBSTRUCTURES:
(1) 6' substructure
(1) 11' substructure w/V door and cat walk
MUD TANKS:(1) 190 bbl (3) compartment mud tank w/single screen shaker(8' W x 4 1/2' H x 30' L)
(1) 200 bbl. (8'W x 4 1/2' H x 35'L) (3) compartment auxiliary tank
BOP EQUIPMENT: Regan 10" x 3000 psi annular.
Hydril 17K80 Closing Unit w/2 80 gallon units.
ROLLING STOCK:
1979 Aztec Pipe Trailer
1978 Columbia Pipe Trailer
1995 6 x 6 Oshkosh (4) rear axle heavy duty chassis p/b L-10 Cummins and Allison automatic Transmission complete w/90 bbl tank--Sunstrand hydrastatic pump and motor powered 3" Gorman Rupp pump.
1995 Freightliner Dog House.
MISC. ITEMS: Rauch hyd. pipe spinner 3 1/2 to 7"--Tongs--Tools--Pipe handling equipment--(2) pipe tubs plus plus
(5) axle carrier
911-4 Challenger 360DD 1982 6000' Double Drum
MAST: Challenger model 200--84' x 200,000 lb. hook load capacity on 8 lines one piece vertical free standing w/ stabbing board--Custom hydraulic lift, roller and guide system for derrick transport--Fluorescent mast lighting--MD/TOTCO Weight Indicators both drums.
DRAWWORKS: Stacked double drums each 10 1/2" x 22 1/2"--Wichita 24" 3 plate air clutches--Single line pull 36,000 lbs.--LeBus grooved for 7/8" lines--(1) McKissick 100 ton (4) sheave traveling block on kelly line--(1) 100 ton McKissick (4) sheave combination block and hook on hoist line--Parmac hydromatic brake--Hydraulic wireline drum--
POWER UNIT: Cat C-15 (540 hp) and Allison 750 transmission and torque converter--200 gal fuel tank on deck--Howard-Turner Swivel--5 ½ x 40’ L square Kelly w/VARCO 4KRVS Kelly Drive Bushing, square type
ROTATING EQUIPMENT: 18" Howard-Turner rotary table--8' elevated drilling floor w/7'6" floor clearance for BOP equipment.
5060 HRS.
INCLUDED WITH RIG:
SUBSTRUCTURE: 8’8” H x 6’6” W x 20’ L T-Type Sub w/(2) 4’ Folding Wings, 7’6” W x 6’6” L Pipe Racking Floor NOTE: Pins to sub and removes for transport w/(2) 5’ x 6’ folding work platforms;
42”H x 6’ W x 50’ long (2) piece catwalk; V-door ramp w/stairs
DOGHUSE:8’ x 23’ Driller House w/3’6” porch, lockers, knowledge box, Star single pen recorder, (4) hydraulic raising cylinders for raising house to drill floor height--All mounted on 1983 Miller 42’ L x 96” W 3 axle float, S/N DB701004, 22.5 tires, Bud type wheels
Triple axle trailer w (3) 20,000 lb. axles with removable rear 4th booster axle. Dimensions: 14'6" H x 10' W x 96' L. Approx. Weight: 120,200 lbs.
1194-1 Drawworks Ideco H-30   Ideco model H-30D SN:56B single drum drawworks complete with catheads, rotary drive and p/b Diesel engine.  
1133-1 Ewbank/EDSI M-100 2000 980 TOTAL HOURS!! REVERSE/CONVENTIONAL  PRICE REDUCED!!

MAST: 65' x 125,000 gross capacity one piece rectangular and square tubing mast--Casing clearance 26" up to 46' long or 32" to 36' long, crown has ample sheaves for two (3) sheave blocks plus sandline sheave--Stabbing board--6" stand pipe w/3" "Y" connection to allow the hook up of an auxillary stand alone mud pump for conventional mud circulation drilling.
DRAWWORKS: (3) drum design p/b two-speed range hydrostatic drive--Both kelly and hoist lines have 20,000 lb. single line capacity. 100,000 lb. limited hookload capacity on 6 lines--Both drums have 6" x 24" brake bands--Sandline drum for up to 3000' 1/2" cable--Has 6" x 24" single brake band.
POWER SUPPLY: (2) Cummins model 6CTA8.3P turbo charge engines. 260 hp each. Each engine can power all rig components, powered through (2) six-strand diamond chain, oilbath compound case.
LDL HOLDBACK SYSTEM:
(2) 20,000 lb. SLP hydraulic cylinders are installed on the back side of mast. (1) each for the kelly and trip block--Each have automatic mast overload protection, weight indicator, and micro feed on drill string/casing load for precise feed off/holdback control
ROTARY TABLE: Ewbank superior design 18" opening which can be tilted up to allow up to 36" clearance p/b two-speed range hydrastatic drive--up to 20,000 ft. lbs torque
KELLY & SWIVEL: 6" ID reverse circulation swivel w/center airline connection--6" ID x 30' kelly and drive bushing-- 6" kelly hose.
TONG POWER: (2) hydraulic cylinders are installed on the back of the mast to provide power for the tongs w/controls at drillers station.
CENTRIFUGAL PUMP:
6 x 6 MCM hydrostatic powered--Up to 1800 gpm @ 95 psi capacity w/air primer.
AIR COMPRESSOR: Sullair (2) stage 750 cfm @ 350 psi air compressor powered from compound case.
DUPLEX PUMP: Failing model FM-45 5" x 6 1/4" hydrastatic powered.
VENTURI MANIFOLD: For reverse circulation drilling.
AUXILLARY WINCH:
5000 lb. capacity mast mounted
LEVELING JACKS: (4) 5" x 30" hydraulic and (2) rear mounted telescopic type screw jacks.
MAST LIGHTS: 110 volt fluorescent lights in mast, control panel and components.
980 TOTAL HOURS!

 

Twin "I" Beam gooseneck three axle (w/4th tag axle) trailer--(2) fold down catwalks on each side including hand rails and steps--Road travel width is 11'
1219-1 Failing CF-2000 1973 A VERY NICE 2000 PACKAGE
58' mast w/stabbing board--Double Drim drawworks w/air clutches & double brake bands both drums--(6) part lines both drums--Spinning cathead--No bailing drum--18" Failing flip up rotary table--No pulldowns--(4) hydraulic and (2) manual leveling jacks--5 x 10 GD duplex mud pump on deck--Weight indicator--(2) hanging balanced tongs--Working platform--Elevator links.
INCLUDED WITH RIG:
DRILL PIPE: Approx. 1700' 3 1/2" x Range II x 3 1/2IF slotted for breakout tool joints--Tubescoped White Band
DRILL COLLARS: (11) 6" x Range II drill collars.
PIPE TRAILER: Gooseneck type with cat walk
(1) 3 1/2" BJ 100 ton elevators
(1) 3 1/2" pipe slips
Misc. handling tools
1973 KW tandem axle chassis p/b 350 (big cam) Cummins.
1265-1 Failing CF-2500 DOUBLE DRUM 2500
58' mast w/stabbing board and swivel guide rails--Stacked double drum drawworks w/air clutches--Parkersburg 15" double hydromatic brake--Pulldowns (chains available but need to be reinstalled)--Series 60 (475 HP) Detroit diesel deck engine--18" Howard-Turner rotary table--(2) 3 sheave McKissick traveling blocks- (6) part lines both drums--4 1/2" x 40' kelly--Roller type kelly bushing--3" ID x 40 ton swivel--3" kelly hose--(5) hydraulic leveling jacks--Weight indicators both drums--(2) tongs--Platforms, walkways, railings and stairs.
Tandem Axle Trailer
1064-1 Failing 2500-A   NICE CLEAN 2500!

58' mast w/stabbing board--Single drum drawworks with sandline drum--air clutches--Cathead--Hydraulic and manual leveling jacks--(2) 471 Detroit diesel engines--GD FY-FXX 7 1/2 x 8 mud pump--(4) part 7/8" drill line--Failing 3" swivel--4 1/4 x 38' square kelly w/roller type bushing--18" Failing rotary table--(2) makeup/breakout tongs--Hydraulic breakout cylinder--(1) set 3 1/2" center latch elevators--(1) set drill pipe slips.

Trailer Mounted
1033-2 Failing 2500-A  

FAILING 2500-A complete with the following attached equipment:
65' x 133,000 gross capacity one piece mast--stabbing board--Single drum drawworks w/Aeroflex 16" air clutch on main drum p/b (2) 471 Detroit diesel deck engines w/manual transmission--Sandline
drum--18" Failing rotary table-swivel--Cat head--4" x 34' square kelly w/solid kelly bushing--(1 )front hydraulic leveling jack--(6) screw type leveling jacks--(2) makeup/brakeout tongs-- 5 x 10” duplex mud pump

Trailer Mounted
1169-12 Franks/Cabot Explorer   Franks Cabot model 1287 complete with: Franks 96/250,000 lb. capacity mast--(4) sheave
crown block--1 1/8" line--All guy wires--Single drum drawworks p/b 3408 Cat and 5860 Allison 6
speed transmission--Oilwell 17 1/2 x 44 rotary table w/table bushings--Substructures: Main sub
10 'H and pony sub 5' both 300,000 capacity--3" x 55' kelly hose--4 1/2 x 40' kelly w/rollertype
bushing--Ideco (4) sheave shorty 160 ton UTB w/bails
Stated to be the companies best rig in their fleet.
Tri-Axle Trailer
1256-1 GD 2000 1976 EXTRA HEAVY DUTY 2000
(2) 6" x 10" GD duplex mud pumps w/11" (3) plate clutches--A separate gear boxes for each mud pump--Speedstar SS-25 double drum drawworks w/4" shaft and modified 18" air clutches--MAST: Reinforced to 90,000 lb. capacity x 58 W/ stabbing board--Water brake--
All Air clutches except mud pump--Pulldowns--(2) BJ Tongs--4 1/2" x 36' square kelly--McKissick (3) sheave traveling block on kelly & same on hoist line complete with spring loaded hook--10" retractable rotary table w/905 Fuller transmission--NEW 12 KW generator--Hydraulic powered Cat mist pump--(4) hydraulic leveling jacks--Walkways and hand rails--(2) 792 drop boxes--(6) strand transfer case--Chain case for drawworks and rotary table--Weight indicator both drums--Mud pressure gauge.
AVAILABLE ACCESSORIES
2000' good used 4 1/2" x 20' x 3 1/2IF drill pipe.
(5) 5 7/8 to 6" x 20' drill collars.
1978 Western Star pipe and tool truck
1994 Volvo pipe truck
Rig pipe handling tools
1976 Crane Carrier Corp (4) axle chassis p/b N-14 (460 hp) Cummins and Fuller 147-8LL transmission.
             
739-10 GD 2000 1976 5 1/2 x 10 GD mud pump--58' mast w/stabbing board--10" retractable rotary table--4 1/2 x 24' hex kelly--(4) hyd. leveling jacks--Hydraulic pulldowns--(2) 3 sheave traveling blocks w/6 part lines--Hydraulic breakout cylinder--(1) spinning cathead--Bailing drum--(2) cylinder Bean water injection system--Operators and helpers platforms--Weight indicator 1976 (4) axle Crane Carrier Corp. chassis with near new N-14E electronic Cummins diesel engine and RR transmission.
906-1 GD 2500SD 1980 70'/110,000 one piece vertical free standing mast w/stabbing board Single Drum drawworks w/air clutches (80,000 lbs capacity on (6) lines--Sandline drum 13,300 lbs capacity--(1) 671 Detroit diesel engine--(1) 65 ton 3 sheave traveling block--6 part 3/4" lines--18" GD rotary table--Howard Turner swivel--(2) catheads--(2) breakout/makeup tongs--(4) hyd. Leveling jacks--6" x 40' hexagon kelly w/ bushing--3" standpipe and mud lines-- (3) axle trailer
1120-1 GD 3000   ABSOLUTELY GORGEOUS GD-3000'

MAST: 95' x 200,000 lb. hook load capacity Lee Engineering vertical freestandiing hydraulically raised and scoped w/stabbing board.

DRAWWORKS: Gardner-Denver 3000 single drum with sandline drum--121 Hydramatic brake--1" drill line--p/b (2) 671 Detroit diesel engines (175 hp each) thru compound case.

SUBSTRUCTURE: Low back model--Gardner-Denver 8'x8'x4' clearance under table work platform--Mud boat.

ROTATING EQUIPMENT: Howard Turner 1825R (18") rotary table--King 75WP swivel--4 1/2" x 40' square kelly w/roller type bushing.

TRAVELING EQUIPMENT: (1) Mud King 110 ton/(4) sheave traveling block--Elevator links--

TONGS: BJ Type LF--BJ Model CTS power casing tongs w/2 3/8", 2 7/8" & 4 1/2" jaws.

MUD PUMP: (1) Gardner-Denver FXN 7" x 14"( fitted w/5 1/2" liners)--Quick change valve caps p/b 60 Series Detroit 14L (425 hp)--Master skidded in steel house.

MUD SYSTEM: 225 bbl mud tank w/ 5 x 6 x 11 Mission Magnum mix pump, Derrick FLC 503 Flo Line shaker--No cones--p/b John Deere diesel engine--80 bbl Mud system w/5x6x11 mix pump p/b 471NA Detrot diesel Premix. 8'Wx7'Hx10'L w/12' covered porch.

GENERATOR:(1) Kohler Model 100REOZLC 88KW capcity p/b John Deere diesel engine.

ADDITIONAL EQUIPMENT: 200 bbl water tank,1300 gal fuel tank, Doghouse & change house all mounted on 42' tandem axle trailer.

MISC: A-1 7 degree survey tool--Toolpusher trailer--Pason Multi pen electronic recorder with satellite download.

TUBULARS: None included

BOP EQUIPMENT: None included

Mast & drawworks mounted on (3) axle trailer.
1250-1 Ideco H-20   COMPLETE WORKING 5000' RIG
MAST: 92' square tube telecoping mast w/stabbing board, Hydraulically raised and cable scoped, (Can make mouse hole connections)--DRAWWORKS: Ideco H-20 SN 410 single drum drawworks w/6 part 1" lines--60 Series Detroit and 5 speed Allison transmission.
ROTATING EQUIPMENT:
17 1/2" Oilwell rotary table
3" x 34' kelly & roller bushing
4" kelly hose
Swivel, 135 ton w/4" opening. (8000' since new)
SUBSTRUCTURE: 10' H (8' clearance under table) with ramp and swing out sides and beaver tail.
MUD PUMPS:
#1: GD FXZ 7 1/4 x 12 duplex p/b twin 671 Detroit diesels
#2: GD 7 1/4 x 16 duplex with all new gear end. No power.
MUD SYSTEM:
240 bbl tank w/shaker, desander and centrifugal pump.
255 bbl suction tank w/desilter and centrifugal pump and mixer hopper. 2 pit stir.
GENERATOR:125KW p/b 3406 Cat
TUBULARS: Approx. 5400' used
3 1/2" x 3 1/2IF tool joint drill pipe, 3200' is 15.50 lb. (1) hole since double white band inspection, 2200' is 13.30 lb and is yellow band.
(7) 6" drill collars.
HANDLING TOOLS:
(2) type C tongs w/extra heads
Drill pipe and collar elevators and slips--Elevator links--pickup subs--crossover subs--Pipe spinner--Bear automatic driller--Rat hole digger--Water tank--Fuel tank--Doghouse-Parts room w/air compressor and new water pump.
BOP EQUIPMENT: None
Drawworks and mast are tandem axle trailer mounted. All other equipment is oilfield skid.
1186-1 IR T-4W 1984 900/350 air--70,000 pullback--12V71 Detroit deck engine--4 1/2 x 25' carousel--Spur gear head--(3) hydraulic leveling jacks--Water injection--DTH oiler--

INCLUDED WITH RIG:
Approx. 1600' used 4 1/2 x 25' x 2 7/8IF tool joint drill pipe
(2) used 6" DTH hammers
(1) spare top head motor
1984 tandem axle Crane Carrier Corp. chassis w/3208 Cat and 13 speed transmission--Tires 60% plus
732-34 Mud Pump Skytop Bewster
D-550
  Skytop Brewster B-550 duplex w/Mattco forged steel fluid end w/quick change caps, Hydril pulsation dampner, Type D pressure gauge, p/b D-379 Cat diesel engine w/radiator & gauges. on master skid Oilfiled Skid
1225-1 Reichdrill T-690 1999 900/350 air--30,000 pullback--High Torque (2) motor tophead--(2) winches--Carousel--465 hp Cat deck engine--Approx. 6500 hrs. 1999 Freightliner tandem axle chassis
1253-1 Rotary Table Howard-Turner
27.5"
  27 1/2" Howard-Turner rotary table--Excellent condition.  
736-12 Rotary Table National/Oilwell 27 1/2"   27 1/2" National Oilwell rotary table. #R30-21A. Completely torn down, checked out and repaired
as needed. (note: unassembled pictures)
 
630-7 Skytop 400 Workover 1985 REFURBISHED WITH ENGINE & ALLISON
MAST: 96' x 210,000 Capacity--Working Platform--Racking board set @ 55' (adjustable)--30" fast line crown sheave--(2) 24" crown sheaves--150 ton (3) sheave traveling block--
DRAWWORKS:
Skytop H1-4210B-38--400HP nominal rating--44,600 single line pull--Depth rating 15,000' 2 7/8"--Main Drum brake rims 42" x 10"--(6) Hoisting speeds--Sandline drum brake rims 38" x 8"--Sandline capacity 15,000'--(4) hydraulic leveling jacks--
(4) axle chassis with 60 Series Detroit and Allison 5861 transmission--Disc. Assist brake--(2) 125 gal. each fuel tanks--44,000 front axle capacity and 44,000 rear axle capacity.
1222-3 Speedstar 70-K 1982 TOPHEAD MUD RIG
7 1/2 x 10 GD FO-FXO mud pump--70,000 pullback--No air--Tophead w/single hydraulic motor 10,000 ft. lbs. torque--Extended mast can run range III casing--(4) part 3/4" line on (2) speed hydraulic hoist (can pull 125,000 lbs)--Single stem loader--Pipe spinner
1982 (4) axle Crane Carrier w/KT Cummins engine Call 307-587-5192
1185-1 Speedstar 70-K 1982 900/350 GHH--70,000 pullback--Tophead drive--42' x 100,000 lb. capacity mast--8V92TA deck engine--Cat water injection--Hydraulic auxillary winch--(4) hydraulic leveling jacks--(2) hydraulic break out cylinders--Hydraulic pipe spinner. 1982 (4) axle Crane Carrier Corp. chassis p/b 8V71 Detroit and 9 speed transmission with deep reduction gears.
1252-1 Speedstar SS40SP 1982 BARE RIG OR PACKAGE!
63’ mast, (3) drum drawworks with air clutches, (6) part lines both main drums, p/b 6V-71 Detroit diesel and 653 Allison transmission, 27” opening rotary table, 6 x 6 Gorman-Rupp centrifugal pump p/b 471 Detroit diesel, Weight indicator, tongs, 4 Ό” x 40’ hex kelly w/roller bushing, King 60PG swivel, Kelly hose, (2) hydraulic winches, (5) hydraulic leveling jacks.
AVAILABLE AT EXTRA COST AS SHOWN:
National C-250 6 ½” x 15” duplex mud pump w/high pressure fluid end and screw caps p/b D-350 Cat, includes air controls, suction hose, mud hopper, mounted on oilfield skid $35,000
Emsco DA-500 5 ½” x 16” duplex mud pump w/high pressure fluid end and screw caps p/b D-353 Cat, air controls, mounted on oilfield skid $45,000
1981 Western Star (3) rear axle winch truck p/b 400 Cummins w/long rig up bed, live tail roll and 50 to Braden winch $30,000
1990 KW tandem axle tractor p/b 400 Cummins $20,000
1985 GMC tandem axle chassis p/b Cummins diesel complete w/65 bbl. vacuum tank & vacuum pump $15,500
Freightliner truck w/25 ton winch $12,500
1982 Ford dog house $3,000
1953 Hobbs tandem axle pipe trailer $2,500
1955 Lacro drop deck trailer 27’ 7” well $ 5,500
Allight light tower p/b Cat diesel $ 6,000
(29) pieces of 4” double white band drill pipe @ $30 per ft. $27,000
(68) pieces of 4” yellow band drill pipe @ $22 per ft. $46,200
(8) 6 Ό” x 26 ½ to 28’ x 4 ½ FH drill collars @ $1000 ea. $ 8,000
Misc. extra parts, subs, drill pipe and casing handling equip. $10,000
(4) axle Crane Carrier p/b 400 big cam Cummins
736-28 Substructure Doghouse
    SUBSTRUCTURE/RAMP:
42" H x 8' 11" W x 39' L "T" back on ramp, 8' from top of kelly bushing to ground.
COMBO PIPE TUB & WALKWAY: (1) 7'6" W x 36" H x 34' L.
(1) 9' W x 28'L top doghouse w/9 lockers, knowledge box, bench storge, skidded including: including (1) 42" H x 8' W x 39' L "T" type doghouse stand.
 
732-22 Trailer Freuhauf 1975 1975 Fruehauf tandem axle drop deck trailer (RGN) w/hydraulically operated removable gooseneck.  
732-21 Trailer Lufkin 1971 40' tandem axle oilfield float w/rolling tailboard.  
732-24 Trailer Trailmobile 1969 1969 Trailmobile Van 27' trailer.    
1253-2 Traveling Block 80 Ton NEW NEW Mud King 80 ton (3) sheave traveling block and hook  
706-5 Walker-Neer 250-40 1980 COMPLETE RECENTLY REFURBISHED AND READY TO DRILL!!
DRAWWORKS - APACHE WALKER-NEER, 250-40, 450 HP, , LEBUS GROOVED, 1" LINE,
AIR DRILLER'S CONTROLS, RIGHT ANGLE DRIVE SINGLE ENGINE COMPOUND W/ AIR
CLUTCH AND BRAKE. P/B 3408 CAT AND CLT754 ALLISON TRANSMISSION W/BENNET
ELECTRIC/OVER AIR SHIFTER, WEIGHT INDICATOR, TULSA PULLDOWN WINCH, 12"
DIRECTIONAL DRILLING BACK BRAKE.

MAST, 58' APACHE WALKER-NEER SINGLE LAY DOWN MAST, 200,000# STATIC HOOK
LOAD, CROWN BLOCK, FASTLINE SHEAVES, 1" LINE, 4" STANDPIPE, LADDER DERRICK
CLIMBER.

HYDRAULIC PIPE HANDLING BOOM.

SUBSTRUCTURE: 4' H SHOP BUILT WITH NEW 5' X 10' STEEL FLIP UP STEEL RAMP.

TOPHEAD DRIVE: 150 TON APACHE.

MUD PUMPS:
#1 EMSCO DA-500 WITH FORGED STEEL END. P/B C-15 CAT W/AIR STARTER.
#2 EMSCO DA-500 W/FORGED STEEL FLUID END, PULSATION DAMPNER, PRESSURE
GUAGE, P/B 353 CAT, 4 X 5 MISSION 50 HP CHARGE PUMP

MUD TANKS: 220 BBL (10'W X 33'L X 5'H) W/ DOUBLE SCREEN SHAKER, DESANDER
CONE, 4 X 5 MISSION 50 HP PUMP, MUD MIXING HOPPER.

BOP EQUIPMENT: KOOMEY TYPE 80 CLOSING UNIT ACCUMULATOR W/REMOTE.

ELECTRICAL UNIT: ALL UTILITY SKID MOUNTED (12' X 36') WITH LIGHTS, ELECTRIC
CONTROL PANEL AND TRANSFORMER, NEW 15 HP BACKUP AIR COMPRESSOR.
GENERATORS:
#1 WAG 220KW P/B 3306 CAT W/ELECTRIC STARTER, RADIATOR AND GUAGES.
#2 CAT SR-4 205kw B/B 3306 CAT W/ELECTRIC STARTER, RADIATOR, & GUAGES.
RIG LIGHTING.

DOGHOUSE: (2) PORCH, KNOWLEDGE BOX, LOCKERS, STORAGE AND HEATER, TOTCO 3
PEN DRILLING RECORDER, QUINCEY 350 AIR COMPRESSOR (25 HP), MOUNTED ON
TANDEM AXLE TRAILER (8' X 29')

TONGS: (2) WOOLEY TYPE B.

HOSES: ROTARY HOSE, SUCTION HOSE, VIBRATOR HOSE, 3000 PSI UPPER AND
LOWER KELLY VALVE.

HANDLING TOOLS: DRILL PIPE AND DRILL COLLAR SLIPS, SAFETY CLAMP, ASSORTED
CASING SUBS: 4 1/2", 5 1/2" 8 5/8" AND 9 5/8".

AUTOMATIC DRILLER: DICKS SATELITE.

WIRELINE UNIT: MID CONTINENT

PIPE TUB: TRAILER MOUNTED W/PIPE TRANSFER SYSTEM TO LOAD/UNLOAD
HYDRAULIC PIPE ARM, (4) SETS PIPE RACKS, (2) SHOP BUILT DRILL PIPE TUBS.

MISC: (1) LOT OF MISC. PARTS, HAND TOOLS AND SAFETY EQUIPMENT IN 8' X 30' PARTS
SHED.
TANKS: 8500 GAL. SKID MOUNTED FUEL TANK.
500 BBL WATER TANK.
500 BBL SINGLE AXLE FRAC TANK.
50 BBL BRINE TANK.

TUBULARS: 1800' USED DRILL PIPE.
(1) 6" DRILL COLLARS.
TRI-AXLE TRAILER Call (307)587-5192 for details.
706-7 Walker-Neer 250-40 1981 WORKING COMBINATION MUD AND AIR DRILLING RIG TO 6000' VERY NICE!
WALKER-NEER APACHE 250/40 TOP HEAD DRIVE DRILLING RIG

1981 WALKER-NEER Model; Apache 250/40 top head drive drilling rig, Single drum drawworks, with 10” X 42” water splashed brakes; 3 plate 24” air clutch; Hoisting capacity, 160,000# capacity. Unit complete with operators panel, and controls. Manual cathead on operator’s side; Cat-line; Pull down gauges; Top head torque gauge; Double 15” Hydromatic Brake; 30” drum clutch; Cathead;

MAST: 61’ H, with 250,000# hoisting capacity; five sheave crown block, grooved for 1” line. Hydraulically raised. 30,000 # hydraulic pull down; Chain driven. Standpipe; Rotary hose and mud line;

TOP HEAD DRIVE: KING 15PS with 30,000 # pull down capacity; Chain hoisted. All necessary hydraulic motors, fluid reservoirs, controls and gauges to make complete.

POWER: CATERPILLAR Model 3408 DI diesel engine, with ALLISON Model 5860 transmission. ( Has spare engine rebuilt by CATERPILLR, “0” hours since rebuilt)


ANCILLARY EQUIPMENT:

MARTIN-DECKER weight indicator; hydraulically operated wire line machine, complete with gauges and controls; Hydraulic service winch; Aluminum hydraulic fluid reservoir; Power washer, powered by gasoline engine;

LINCOLN, welder,

Hydraulically operated Wireline machine

Hand tools, handling tools, including slips, elevators, and subs.

ALL above mounted on tri-axle trailer, with hinged sub base; 4’ H, folding walkways with stairs and safety railings. ( Sub base rebuilt)

DOG HOUSE: 8’W X 36’L steel constructed dog house, with knowledge box; parts storage; lockers; Electric heat; BEAR automatic driller. Micro-wave oven; all above mounted on tandem axle trailer, with folding walkways, stairs and safety railings. 35 KW MARATHON LIMA generator, powered by DETRPOIT 3-53 diesel engine; Assortment of Hand tools;

BLOW OUT PREVENTOR: REGAN 8 5/8”, 3000 # annular BOP, with top and bottom , 20 hole flanges; With shop made air diverter bowl.

PIPE HANDLING: Hydraulically operated pipe racks, with Hydraulic pipe boom. Will handle pipe up to 15” in diameter.

TUBULARS:
8,416’ +/- 4” OD Grade E drill pipe, hard banded; Not inspected but appears to be yellow band quality.

(16) 6” to 6 Ό” OD drill collars, slip recessed and hard banded, with 4 “ FH connections.


MUD PUMP: CONTINENTAL EMSCO model D-375 7 Ό” X 14” duplex mud pump, S.N. 233; complete with all necessary, pluming, valving and controls to make complete; Quick change valve caps on fluid end; CONTINENTAL EMSCO pulsation dampener; OTECO relief valve; Mud gauge; Mud mixing hopper; Vibrating hose; Winch to handle hoses and lines; Powered by CATERPILLAR 3408 Diesel engine with clutch; All above unitized and skid mounted.



AIR PACKAGE:

SULLAIR model 1300 CFM @ 150 PSI air compressor, complete with all necessary piping, vales, coolers and controls to make complete; Powered by CATERPILLAR model 3406 diesel engine,, with clutch. All unitized and cabinet enclosed; Skid mounted,

SULLAIR model 1300 CFM @ 150 PSI air compressor, complete with all necessary piping, vales, coolers and controls to make complete; Powered by CATERPILLAR model 3406 diesel engine,, with clutch. All unitized and cabinet enclosed; Skid mounted,

JOY WB-12 air booster, 6” X 7” single stage, powered by CATERPILLR Model 3406 diesel engine; COTTA transmission; Complete with all necessary hoses, gauges and controls; Fabricated by WESTERN TRADING CO, in 1980. All mounted on mud boated skid, with MEYERS triplex soap pump, powered by diesel engine; soap tank; barrel racks.

275 bbl capacity water tank, with tool room and wash down pump; Skid mounted.

45’L collar trailer,

2007 PITTS 36’L drill pipe trailer tandem axle

Shop built 34’L drill pipe trailer

1979 MACK DM600 tandem axle winch tractor, S.N. DM68652796, powered by MACK diesel engine; two stick 6 speed transmission; Equipped with TULSA 64 winch with headache rack; In frame tail roller; 11R22.5 tires front and rear,


Handling tools, slips, elevators, tongs; hammer drills; hand tools; parts and accessories necessary to operate a drilling rig.
TRI-AXLE TRAILER CALL 307-587-5192 FOR PICTURES AND PRICING.
706-3 Walker-Neer 150-25 1980 COMPLETE WORKING UNIT.

DRILLING RIG: Walker-Neer Apache 150-25--50/150 mast-- King model 10PS tophead drive--Hydraulic arm drill pipe/drill collar/casing handling arm and pipe rack system--Single drum drawworks w/6 part lines p/v671 Detroit diesel engine through Allison torque converter and 5 speed transmission--Rig is mounted on (4) axle crane carrier.
SUBSTRUCTURE: 14" H x 8' W x 36' L back on sub base.
MUD PUMP: Gardner-Denver FXN 7 1/4 x 14" duplex w/Matco quick change fluid end p/b twin 671 Detroit diesel engines.
AIR COMPRESSORS: (2) 1050 cfm @ 150 psi Gardner-Denver screw type air compressors each p/b 3406 Cat diesels.
AIR BOOSTER: (1) Joy model WB-12X 7-5 p/b3406 Cat.
DOGHOUSE: 8' W x 40' L trailer mounted w/automatic driller, work bench, lockers, storage cabinets.
GENERATOR: 36KW John Deere diesel-Rig lighting.
TANKS: 300 bbl water tank, Diesel fuel tank.
WATER/SOAP INJECTION SYSTEM:
Myers triplex pump w/soap tank (skid mounted)
DRILL PIPE & COLLARS:
Approx. 4700' used 3 1/2" w/3 1/2IF tool joints.
(14) 6" drill collars.
(3) 8' x 40' pipe tubs.
Hydraulic pipe racks w/ tool tub.
BOP EQUIPMENT:
(1) 3000# annular.
(1) Washington rotating head.
HANDLING EQUIPMENT:
(2) Web Wilson Type "C" tongs.
Misc. subs and tools

Rig is mounted on (4) axle Crane Carrier chassis.
979-1 Walker-Neer CC- 2000
Con-Cor Drill w/Hydraulic pipe handling system w/loader arm--40' mast--6V71 Detroit deck engine--Air clutch on drawworks--GD WEJ air compressor 450/250 capacity--(4) hyd. Leveling jacks--King 3T top drive-- (3) axle Crane Carrier w/250 Cummins.
1246-1 Wilson Super 38   55' tubular mast--Wilson Super 38 single drum drawworks w/air clutch--2000' spool of line--350 Cummins engine and 10 speed transmission--(2) cat heads--Emsco 17 1/2" rotary table--Brewster (3) sheave traveling block--40' kelly--Gray swivel--Rotary hose--(2) Web Wilson type C tongs--220 gal. fuel tank--Lima 65KW generator p/b White diesel engine--Steps & Rails--Mud Gauge--Totco weight Indicator
INCLUDED WITH RIG:
MUD PUMPS:
#1 Oilwell P-212 p/b 8V71 Detroit master skidded
#2 Oilwell P-212 p/b 671 Detroit master skidded.
DOGHOUSE: Drill recorder--Junk box--2000 gal. fuel tank mounted on tandem axle trailer.
TUBULARS: 2200' used 4 1/2" drill pipe--(7) 6" x 29' + or - drill collars
(2) sets pipe racks--Tandem axle pipe trailer
FUEL TRAILER: 600 gal fuel tank and tool box.
HANDLING TOOLS:
(1)5 1/2" elevator
(1) 4 1/2" elevator
(1) 8 5/8" elevator
(10) Assorted Subs
Rathole digger
MUD TUB: (1) 8' X 38' X 3'
DRILL BITS: (1) 12 1/4" (2) 8 5/8" (2) 7 7/8" (1) 5"
MISC: Chain tongs, pipe wrenches, Hand tools.
Tandem Axle Trailer
1270-1 Wilson Super 38
Double
Drum
1978  BACK IN DOUBLE DRUM--96/180 double triple mast--Hydraulically raised and scoped--Rod and tubing boards--Traveling block 1978 (5) axle Carrier with 8V92 Detroit and 6 speed Allison Trans.
1169-8 Wilson Super 38
Torqair
  96' x 200,000 SHL capacity w/hydraulic raising and telescoping mast w/stabbing board--Wilson 38 single drum drawworks p/b near new 350 Cat and Twin Disc torque converter--(8) part 1" line--(4) sheave x 125 ton traveling block--10'W x 10'L x 5'H substructure (rig pins to sub)--18" Oilwell rotary table-4 1/2" x 38' kelly w/roller type busing--125 ton swivel--Hydraulic leveling jacks--Weight indicator--Make up and breakout tongs-- Tandem axle trailer.
1101-2 Wilson Mogul 42   95' x 300,000 hydraulically raised and scoped mast--Single drum drawworks grooved for 1 1/8" lines w/26" (2) plate Wichita air clutch--Hydramatic brake--12V71 Detroit w/Allison 5 speed transmission--27 1/2" rotary table w/18" clutch--Sowa (4) sheave 150 ton traveling block--Weight indicator--Hydraulic breakout cylinder--6 1/2 clearance under substructure and back on ramp--No kelly, swivel or tongs included.
Rig is owned by a water well company and was used for drilling large diameter wells. It has been used very sparingly in the last few years and is stated to be in very good mechanical condition.
Three Axle Trailer
1169-10 Wilson Mogul 42 1977 SHOPPED & REBUILT IN 2006

1977 WILSON MOGUL 42 - Detroit 12V diesel, single drum w/double jack shaft draw-works, 102ft. X 300,000# hydraulically raised derrick, hyd. leveling jacks, McKissick 4 sheave block, 125 ton hook, 55 ft. swivel hose, 6 sheave crown, Martin Decker weight indicator, Parkerburg hydro-matic brakes, Foster cat heads, 1” Lebus grooved drum, stand pipe racking board, w/cat walks & stairs, mud boat and substructure.
Three axle Trailer